top of page

Review: Walkback Scanner and Scan A Beam

Stephen Knight
14 hours ago
4 min read

Welcome to a review of the Walkback Scanner and Scan a Beam light painting tools from Ben Woods Photography, a light painting photographer based in Adelaide, Australia.



The Walkback Scanner and Scan A Beam from Ben D Wood Photography.


Walkback Scanner


The Walkback Scanner is a Backlight Scanner (BLS), a device invented by Pala Teth, which illuminates a scene as you walk towards the camera, but with the light source hidden by the double cone design. This version has some improvements over the previous versions of the Walkback Scanner including removeable white inserts to reflect more light out of the scanner, a smaller lip design to reduce back scatter, and an expanded range of flashlight or torch adapters. The removeable spacers result in a fixed distance between the cones, and allows for easy pack down of the device when not in use. Whether to use the white inserts or not may depend on the torch beam. Lights with (floody) wide and bright spill beams will be better without the white inserts. Narrower beam (throwy) flashlights may be better with the white inserts. It is important to wear black, including a balaclava and sometimes gloves, as well as keeping moving whilst the light is on. The light has to be aimed at the camera, so I place an LED tea light on top of the camera. The YouTube video at the end of this article shows the light beam as I walk towards the camera.


Walkback Scanner without white reflectors (left) and with white reflectors (right). Both with Convoy S21D 519A 60 degree torch/flashlight.


Long exposure light painting photo created using the Walkback Scanner.
Long exposure light painting photo created using the Walkback Scanner.
Long exposure light painting photo created using the Walkback Scanner.
Long exposure light painting photo created using the Walkback Scanner.

Scan A Beam


The new Scan A Beam is a light painting scanner device that can be used for long exposure light painting portraits, or illuminating inaminate objects at night or in dark spaces. You simply scan the subject with light from head to toe. The scanner has to be directed more than 90 degrees away from the camera so that is invisible. Ben has really thought about this design. There is a rear diffuser, which does an excellent job of diffusing the beam to avoid hotspots. In this configuration, the light is collimated by the devices cone. This has the maximum light output. For more diffuse softer light, a front diffuser can be added. This will lower the relative brightness. Finally, a collimator with two shutters can be added onto the front for more beam control. This is best used with only the rear diffuser.


The Scan A Beam's brightness, measured as illuminance photometric, is very impressive compared to other light painting scanners.

  • Scan a Beam - Rear Diffuser - Noctigon KR4 519A 5700K Turbo: 330 lux/1m

  • Scan a Beam - Rear Diffuser - Convoy S21D 519A 5700K Turbo: 286 lux/1m

  • Scan a Beam - Rear and Front Diffuser - Noctigon KR4 519A Turbo: 51 lux/1m

  • Scan a Beam - Rear and Front Diffuser - Convoy S21D 519A 5700K Turbo: 44 lux/1m

  • Light Painting Brushes Portrait Scanner - Noctigon KR4 519A 5700K Turbo: 28 lux/1m

  • Scanner DKL Pro 6500K 100% - 62 lux/1m



Be aware of the inverse square law when using the Scan a Beam. The closer you are to the subject, the brighter they will be illuminated. Thus if you are taking multiple photos during a photoshoot, you need to make sure you are at a similar distance from the subject for each photo.


Scan a Beam beam profile with rear diffuser (left 2), rear and front diffuser (right 2).


EL wire light painting portrait using the Scan A Beam for model illumination. Model: @mindy_madness_
EL wire light painting portrait using the Scan A Beam for model illumination. Model: @mindy_madness_
EL wire light painting portrait using the Scan A Beam for model illumination. Model: @izzy_artmodel_
EL wire light painting portrait using the Scan A Beam for model illumination. Model: @izzy_artmodel_

Compatible Torches/Flashlights

The Walkback Scanner and Scan a Beam are compatible with a wide range of flashlights or torches, with a large range of adapters being available. I usually recommend using high CRI lights for illumination purposes, as they render colours better, particularly reds, greens, and browns for trees and foliage. High CRI lights are also better for more accurate skin tones. For the Walkback Scanner, my preferred light is the Convoy S21D, with 519A LED, and 60 degree beaded optic. You can choose between a range of colour temperatures, if in doubt go with 5000K or 5700K. This light uses 21700 Li-ion batteries and you will need a dedicated Li-ion charger. This light also works well with the Scan a Beam. However, for the Scan a Beam I prefer the Noctigon KR4, with 519A domed LED, and colour temperature of your choice. I prefer this light as you can put it into momentary or tactical modes, so it is only on when the tail switch is held down. However, it's a complex light to configure, so not for muggles. The Convoy S21D is easier to use. A good light, with much higher brightness, but only 70CRI is the Wurkkos T1. If you need coloured light, then the Ants on a Melon RGB Critter BT (10% off with code: SKLA10) is the best option.


A selection torches/flashlights compatible with the Walkback Scanner and Scan A Beam.
A selection torches/flashlights compatible with the Walkback Scanner and Scan A Beam.

Conclusion


These devices are well designed and constructed. They are the best Backlight and Light Painting Scanners I have tested, and are highly recommended.





Help support this website by donating to:



Comments


  • Stephen Knight Instagram
  • Stephen Knight Facebook
  • Threads
  • Youtube

© 2021-2026 Stephen Knight. All Rights Reserved.

bottom of page